Flushing Library Contract eBook

Division 01 - DOCSTANDARDGENERAL CONDITIONS SINGLE CONTRACT PROJECTS

-3,.,. ,,,..c,,.,.....,....,., DESIGN + CONSTRUCTION

Issue Date June 01, 2013 Revised - January 15, 2015

1.3 RELATEDSECTIONS: Includewithout limitation the following:

Section 01 1 o 00 Section 01 31 00 Section 01 32 00 Section 01 33 00 Section 01 77 00 Section 01 78 39

SUMMARY PROJECTMANAGEMENTAND COORDINATION CONSTRUCTIONPROGRESSDOCUMENTATION

A. B. C. D. E. F.

SUBMITTAL PROCEDURES CLOSEOUT PROCEDURES CONTRACT RECORD DOCUMENTS

1.4 DEFINITIONS:

A. Refer to Article 2 of the Contract for definition of terms, words and expressions used in the General Conditions not otherwise defined herein. B. Design Consultant: "Design Consultant" shall mean the entity responsible for providing design services for the Project, including without limitation, preparing the construction documents {drawings and specifications) and providing services in connection with such documents during construction. The entity serving as the "Design Consultant" may be a corporation, firm, partnership, joint venture, individual or combination thereof. Such entity may be either an employee{s) of the City or an entity engaged by the City to provide such services. C. Commissioning: A Total Quality Assurance process that includes checking the design and installation of equipment, as well as performing functional testing of the same to confirm that the installed equipment is operating and in conformancewith the Contract Documents and the City's requirements. General: If compliance with two or more standards is specified and the standards establish different or conflicting requirements for minimum quantities or quality levels, the Contractor shall comply with the most stringent requirement as determined by the Commissioner. The Contractor shall refer any uncertainties and/or conflicting requirements to the Commissioner for a decision before proceeding. B. Minimum Quantity or Quality Levels: The quantity or quality level shown or specified shall be the minimum provided or performed. The actual installation may comply exactly with the minimum quantity or quality specified, or it may exceed the minimum within reasonable limits. To comply with these requirements, indicated numeric values are minimum or maximum, as appropriate, for the context of requirements. The Contractor shall refer any uncertainties to the Commissioner for a decision before proceeding. General: Qualifications paragraphs in this Article establish the minimum qualification levels required. Individual Specification Sections specify additional requirements. B. Installer Qualifications: Special Experience Requirements may apply to the firm that will install, erect or assemble specified work required for the Project. If applicable, such Special Experience Requirements are set forth in the Bid Booklet and the Addendum. C. Manufacturer Qualifications: Special Experience Requirementsmay apply to the firm that will manufacture equipment, products or systems specified for the Project. If applicable, such Special Experience Requirementsare set forth in the Bid Booklet and the Addendum.

1.5 CONFLICTINGREQUIREMENTS: A.

1.6 QUALITY ASSURANCE: A.

QUALITY REQUIREMENTS 014000 - 2