Flushing Library Contract eBook

Division 01 - DOC STANDARDGENERAL CONDITIONS SINGLE CONTRACT PROJECTS

Issue Date - June 01, 2013 Revised - January 15, 2015

~M---~~

DESIGN + CONSTRUCTION

SECTION 01 77 00 CLOSEOUT PROCEDURES

PART I - GENERAL

1.1 RELATEDDOCUMENTS:

A. The following documents apply to all requiredwork for the Project: (1) the Contract Drawings, (2) the Specifications, (3) the General Conditions, (4) the Addendum, and (5) the Contract [City of NewYork Standard ConstructionContract].

1.2 SUMMARY: A.

This Section includes administrative and general procedural requirements for Closeout Procedures, includingwithout limitation the following: 1. Definitions 2. Substantial Completion 3. Final Acceptance 4. Warranties 5. Final Cleaning 6. Repair of the Work B. LEED: Refer to the Addendum to identify whether this project is designed to comply with a Certification Level according to the U.S. Green Building Council's Leadership in Energy & Environmental Design (LEED) Rating System, as specified in Section 01 81 13, "SUSTAINABLE DESIGN REQUIREMENTS FOR LEED BUILDINGS." C. COMMISSIONING: Refer to the Addendum to identify whether this project will be commissioned by an independent third party under separate contract with the City of New York. Commissioning shall be in accordance with ASHRAE and USGBC LEED- NC procedures, as described in Section 01 91 13, GENERAL COMMISSIONINGREQUIREMENTS.The Contractor shall cooperate with the commissioning agent and providewhatever assistance is required.

1.3 RELATEDSECTIONS: includewithout limitation the following: A. Section 01 10 00 SUMMARY B. Section 013300 SUBMITTAL PROCEDURES C. Section 01 7419 D. Section 01 78 39 CONTRACT RECORDDOCUMENTS E. Section 017900

CONSTRUCTIONWASTE MANAGEMENT& DISPOSAL

DEMONSTRATIONAND OWNER'S PRE-ACCEPTANCEORIENTATION

1.4 DEFINITIONS:

A. Refer to Article 2 of the Contract for definition of terms, words and expressions used in the General Conditions not otherwise defined herein.

B. Design Consultant: "Design Consultant" shall mean the entity responsible for providing design services for the Project, including without limitation, preparing the construction documents (drawings and specifications) and providing services in connection with such documents during construction. The entity serving as the "Design Consultant" may be a corporation, firm, partnership, joint venture, individual or

CLOSEOUT PROCEDURES 01 77 00 -1